This document is intended to define UTRAN Key Performance Indicators, which give information about quality, performance, load, capacity, .. in a uniform way to the operator.
These indicators may be used for the following purposes:
Definition of formulas, which are used for realization of predefined reports in the Performance Management application of the O&M Toolset.
some KPI explained are :
- Call setup success rate
- RRC connection establishment success rate
- RRC connection establishment failure rate
- RAB establishment success rate
- RAB establishment failure rate
- Paging Failure Rate
- Connection Release rate
- State transition failure rate
- Transport Channel Reconfiguration success rate
- Transport Channel Reconfiguration failure rate
- Physical Channel Reconfiguration success rate
- Physical Channel Reconfiguration failure rate
- Outgoing Hard Handover success rate
- Outgoing Hard Handover failure rate
- Outgoing Hard Handover drop rate
- Relocation Preparation failure rate
- Outgoing CS Inter System Handover success rate
- Outgoing CS Inter System Handover failure rate
- Outgoing CS Inter System Handover drop rate
- Soft Handover rate
- Outgoing Relocation per Call rate
- Outgoing Hard Handover per call rate
- Outgoing CS Inter System Handover per call rate
- Base Band usage rate
- Code usage rate
- Code allocation success rate
- STM-1 Transmission usage rate
- STM-1 Receive usage rate
- STM-1 Transmit/Receive rate
- E Transmit/Receive rate
- ATM Transmit/Receive rate
0 Comment :
Post a Comment